OSHA 30 Hour Construction Industry – $175
When you’re responsible for keeping a construction site safe and secure, you need every tool you can get. Our OSHA 30-Hour Outreach Training for Construction teaches you precisely what you need to know to build a culture of safety and reduce job-site accidents.
Additionally, you’ll receive a comprehensive overview of the policies, procedures, and best practices in OSHA’s 29 CFR 1926 standards for construction. The course also covers vital information about all the significant hazards found on the site.
For example, you’ll learn how to create and implement a safety and health program that addresses critical safety topics in the industry, such as stairways and ladders, confined spaces, hand and power tools, scaffolding, and explosives and blasting agents.
Additionally, you should know what your employer’s responsibility is for your safety, as well as the rights OSHA grants you as a worker. That’s why you’ll learn how to file a complaint if your workplace isn’t living up to its safety obligations.
Course Duration: 30 Hours
COURSE OBJECTIVES
The OSHA 30 Hour Construction Industry Training course is a comprehensive safety program designed for anyone involved in the industry. Specifically devised for safety directors, foremen, and field supervisors; the program provides complete information on OSHA compliance issues. OSHA recommends Outreach Training Programs as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Construction workers must receive additional training, when required by OSHA standards, on specific hazards of the job. Upon successful completion of the course, participants will receive an OSHA 30-Hour DOL course completion card within 2 weeks. The OSHA 30 Hour Outreach course is NOT equivalent to the OSHA 510 or 511 courses and will not meet the course prerequisites to take the OSHA 500 or 501 courses.
- Explain the importance of OSHA in providing a safe and healthful workplace to workers
- Recognize OSHA Standards references applicable to specific hazardous conditions and practices (Introduction to OSHA Standards)
- Recognize the aspects of 1926 Subpart C (General Safety and Health Provisions)
- Implement preventative measures for accidents in their workplace (Subpart D – Occupational health and Environmental Controls)
- Describe types of personal protective equipment (PPE), and the requirements for its use in OSHA standards (Subpart E – Personal Protective Equipment)
- Recognize the requirements for fire protection in the workplace (Subpart F – Fire Protection and Prevention)
- Identify the various types of rigging equipment used to protect employees (Subpart H – Rigging; Subpart N – Cranes and Rigging)
- Identify the critical health and safety hazards of welding and cutting in the construction industry (Subpart J – Welding and Cutting)
- Identify common electrical hazards and related OSHA standards (Subpart K – Electrical Standards)
- Recognize the importance of scaffolding for workers in elevated workplaces (Subpart L – Scaffolding)
- Implement measures for protecting workers and equipment from dangerous falls (Subpart M – Fall Protection)
- Recognize the hazards associated with working in or around excavation sites (Subpart P – Excavations)
- Explain the safety requirements necessary to protect workers around concrete and masonry jobs (Subpart Q – Concrete and Masonry)
- Protect workers who perform jobs on or around stairways or ladders at worksites (Subpart X – Stairways and Ladders)
- List and describe the hazards and prevention required for confined spaces
Topics
- Module 1: Introduction to OSHA
- Module 2: Managing Safety and Health
- Module 3: OSHA Focus Four Hazards
- Module 4: Personal Protective Equipment
- Module 5: Health Hazards in Construction
- Module 6: Stairways and Ladders
- Module 7: Concrete and Masonry Construction
- Module 8: Confined Spaces
- Module 9: Cranes, Derricks, Hoists, Elevators and Conveyors
- Module 10: Ergonomics
- Module 11: Excavations
- Module 12: Fire Protection and Prevention
- Module 13: Materials Handling, Use and Disposal
- Module 14: Motor Vehicles, Mechanized Equipment and Marine Operations; Rollover Protective Structures and Overhead Protection; and Signs, Signals and Barricades
- Module 15: Safety and Health Programs
- Module 16: Scaffolds
- Module 17: Tools – Hand and Power
- Module 18: Welding and Cutting
- Module 19: Silica Exposure
- Module 20: Lead Exposure
- Module 21: Asbestos Exposure
Upon passing the exam the student will receive a Completion/DOL Card. Students receive a temporary certificate upon completing the training program and a course completion or Department of Labor (DOL) card within 2 weeks.
- Validity of the outreach training program from the date of purchase (365 days or 1 year)
- 6 months after the first launch; including the survey
- Additionally, if all attempts on the final exam are exhausted, the course will no longer be able accessible
- For OSHA Online Outreach training programs, students must adhere to the following:
- Spend at least 600 minutes or 10 hours in the course. (10-hour general and construction courses)
- Spend at least 1800 minutes or 30 hours in the course. (30-hour general and construction courses)
- Only spend a maximum of 7 hours and 30 minutes on the course each day
- Complete a survey evaluating the course upon completion
- Pass all quizzes and the final exam with a score of at least 70% in three attempts or less before a certificate of completion can be issued
- Only access the OSHA Outreach training within U.S. Jurisdiction
- Spend the required time in the course curriculum before the course can be completed
- Validate your identity throughout the learning event to successfully pass the course
Hours of Operation for support are:
Monday through Friday 8 AM (CST) to 8 PM (CST)
Saturday Closed
Sunday Closed
10 and 30-hours English Outreach Programs:
Jason Cole