Comtrain classes are designed to meet OSHA regulations and addresses applicable ANSI standards and equipment needed to meet those standards. All Comtrain courses meet the Criteria for Accepted Practices in Safety, Health, and Environmental Training as per ASSE/ANSI Z490.1. The Comtrain Tower Rigging Courses addresses OSHA 29 CFR 1926, ASSE/ANSI 10.48-2016, ASSE/ANSI 10.42-2000-R2017, ANSI/TIA ASME B30.9 and B30.26.
“Have you been “COMTRAINED”?”
We are proud of the fact that a “COMTRAIN CARD “ has become the term commonly used to describe all tower training certification cards (certs). The common question asked by those seeking verification of training is: “Do you have your “Comtrain Card?” Climbers that graduate and receive an authentic Comtrain cert card can boast that they have actually been “COMTRAINED”.
The Basic Tower Rigging Course addresses (OSHA 29 CFR 1926, ASSE/ANSI 10.48-2016, ASSE/ANSI 10.42-2000-r2017, ASME B30.9 and B30.26) rigging operations in which the loads are less than 1000 lbs. More Info
The Competent Tower Rigging Course addresses (OSHA 29 CFR 1926, ASSE/ANSI 10.48-2016, ASSE/ANSI 10.42-2000-r2017, ASME B30.9 and B30.26) rigging operations in which the loads are less than 1000 lbs. More Info
This course is designed to prepare a company’s in-house instructor to incorporate Comtrain’s “Competent Rigging” training into company safety plans and policies and then deliver the training to their employees. More Info
The Rigging Instructor ReCertification course runs for 2 days where attendees will be recertified at the Competent Rigger and Instructor Level. Comtrain requires that all In-House Instructors be Re-Certified every 24 months. More Info
WE OFFER PRIVATE/HOSTED CLASSES
In addition to our weekly scheduled Open Enrollment Classes we can bring our training to your location! Call about scheduling a class for your Climbers and/or Riggers. Certain requirements pertain including providing a tower for the practical portion of the training, minimum class size and ample lead time.